Novus NVIP-4DN2004H/IR-1P, Руководство пользователя

Страница: 16 / 36

NVIP-4DN2004H/IR-1P - User’s manual (short form) ver 1.5
All rights reserved © AAT Holding S.A.
16
ELECTRIC CONNECTORS AND RESTORING FACTORY DEFAULTS
5. ELECTRIC CONNECTORS
5.1. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3af) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
WARNING!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
6. RESTORING FACTORY DEFAULTS
6.1. Restoring factory defaults by software means
Camera NVIP-4DN2004H/IR-1P allows you to reset your settings to the factory settings. To restore the
camera settings to the default settings, go to the
"Load Default" tab (Remote Setting -> Advanced ->
Load Default). Then select options and functions of the camera whose settings are to be reset and press
the
"Save" button.
After about 30 seconds, you can re-connect to the camera (at the current IP address, as long as it was
not reset network settings or on the default IP address).
Information
A description of all functions of the camera is included in the full user manual, posted on the product
page on www.novus.com/en