NVIP-3DN7540D/IRH-
2P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding sp. z o.o.
19
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
The camera can be supplied by using RJ45 network socket or by power connector. To run NOVUS IP
camera you can connect ethernet cable between camera and network switch with PoE+ support. You
can also use power supply with parameters compatible with camera specification to power camera via
power in jack. Description of the power in jack connector is located in Section 2.1 on page 9.
.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
5.2. Connecting alarm and audio inputs/outputs.
Description of alarm and connector terminal is presented in the table below:
Input and output connector states:
ELECTRIC CONNECTORS AND ACCESORIES
Alarm input
Normal state
5V
-
Active state
0V
I<0,2mA
Alarm output
Normal state
No connected (R=∞)
-
Active state
Conected (R=30
Ω
)
0.1A, 30VDC/AC
Cable
Description
Color
Alarm input +
GREEN
Alarm input -
ALM_IN -
BLUE
Alarm
A
ORANGE
Alarm output -
ALM_OUT -
YELLOW
