NVIP-2DN5020SD/IRH-2 User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A.
3
IMPORTANT SAFEGUARDS AND WARNINGS
IMPORTANT SAFEGUARDS AND WARNINGS
1. Prior to undertaking any action with the device, please consult following manual, and read all the safety and
operating instructions before operating the device.
2. Please keep the following manual for the time of device’s lifespan in case when referring to the contents of
the manual would become necessary.
3. Follow all the safety precautions described in this manual. Improper installation and camera operation may
have impact on operator safety as well as camera operational reliability and lifespan.
4. Camera mounting and operations should be conducted according to this manual, both for users and service
personnel.
5. Please unplug the unit from the power before starting maintenance procedures.
6. Please use only attachments / accessories specified by the manufacturer.
7. Operating the camera in high-humidity environments (such as in proximity of swimming pools, bathtubs,
inside wet cellars etc.) when the mounting method doesn't provide declared water tightness is forbidden.
8. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not
recommended since it may lead to heat build-up and damaging the device itself in consequence.
9. Mounting the camera on unstable surface or using not recommended mounts is forbidden. Improperly
mounted camera may be the cause of fatal accident or be seriously damaged itself. Camera must be mounted
by qualified personnel with proper authorization, in accordance to user’s manual.
10.Device should be supplied only from power sources which parameters are in accordance to one’s pointed out
by the producer in camera technical datasheet. Therefore it is forbidden to supply the camera from power
sources with their parameters unknown, unstable or not meeting the producer’s requirements.
11.Signal cables (conducting TV or/and telemetric signal) should be placed in a way excluding the possibility of
damaging them by accident. Special attention must be paid to cables going out of the camera and connecting
power supply;
12.To avoid equipment damage, whole TV circuit should be equipped with properly made (in accordance with
Polish Regulations) discharge-, overload- and lightning protection devices. Usage of separating transformers
is advised.
13.Electric installation supplying the device should be designed to meet the specifications given by the producer
in such a way, that overloading it is impossible.
14. Camera should be protected from foreign objects entering its inside, liquids and excessive humidity.
15. User cannot repair or upgrade equipment himself. All maintenance actions and repairs should be done only
by the qualified service personnel.
16. Unplug the camera from the power source immediately and contact the proper maintenance department when
the following occurs:
Damages to the power cord or to the plug itself;
Liquids getting inside the device or exposure to strong mechanical shock;
Device behaves in a way not described in the manual and all adjustments approved by the
manufacturer, and possible to apply by user himself, seem not to have any effect;
Camera is damaged;
Atypical behaviour of the camera components may be seen (heard).
17. In case of repairs please pay attention to using only original replacement parts (with their parameters in
accordance to those specified by the producer) should be paid. Non-licensed service and non-genuine
replacement parts may cause fire or electrocution;
18. After maintenance procedures please conduct device tests and make sure that all the camera components are
operating correctly.
Due to the product being constantly enhanced and optimized, certain parameters and functions described in the
manual in question may change without further notice.
We strongly suggest visiting the
www.novuscctv.com
website in order to access the newest manual