Novus NVIP-2DN5001C-1P, Руководство пользователя

Страница: 20 / 48

NVIP-2DN5001C-1P User’s manual(short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
20
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
The camera is supplied by using RJ45 network socket. To run NOVUS IP camera you have to connect
ethernet cable between camera and network switch with PoE support (IEEE 802.3af). You can also use
a power injector compatible with IEEE 802.3af standard.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors (e.g. NVS-110E/P) is advised. Any damages resulting from surges are not eligible for
service repairs.
5.2. Connecting alarm inputs/outputs.
Description of alarm input/output connector terminal is presented in the table below:
Input and output connector states:
•
Alarm input connections
ELECTRIC CONNECTORS AND ACCESORIES
Alarm
input -
IP Camera
Alarm
input +
Switch/sensor
Alarm input
Normal state 5V -
Active state 0V I<0,2mA
Alarm output
Normal state No connected (R=∞)
Active state Conected (R=30Ω)
-
0.1A, 30VDC/AC
1-Alarm .
2-Alarm output -
3-Alarm input +
4-Alarm input -