NVIP-2DN5000D/IR-1P, NVIP-3DN5000D/IR-1P, NVIP-5DN5000D/IR-1P User’s manual
(short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
19
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
•
software (web browser level)
•
hardware (using reset button)
6.1. Restoring factory defaults by software means
User can restore default settings of the IP camera except network settings (optional). To restore to
default settings go to:
Maintenance -> Default Settings
tab. Process of restoring takes about two
minutes.
6.2. Restoring factory defaults by hardware means
In order to restore factory defaults for the camera please follow the instructions:
•
Press down on the tab marked with an arrow to lift up the dome cover slightly. While pressing on
tab, twist the dome cover counter clockwise just a few degrees to release dome cover from back
clips. Lift off the cover.
•
Press the
RESET
button and hold on for 5 seconds
•
Release button
•
Re-attach the camera cover, until it snaps into place.
•
Log on after approx. 2 minutes using default IP address (http://192.168.1.200) and default user
name (root) and password (pass)
RESTORING FACTORY DEFAULTS
Reset
http://www.e-camere.ro/camere-supraveghere-ip/Novus/NVIP-3DN5000D-IR-1P
