Novus NVIP-2DN3036V/IR-1P, Руководство пользователя

Страница: 18 / 40

NVIP-2DN3037V/IR-1P - User’s manual (short form) ver 1.3.
All rights reserved © AAT Holding S.A.
18
RESTORING FACTORY DEFAULTS
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
 software (web browser level)
 software (NMSiptool level)
6.1. Restoring factory defaults by software means (web browser level)
User can restore default settings of the IP camera. To restore to default settings go to: “Advanced
Config -> Config Backup & Restore” tab. Process of restoring takes about two minutes.
6.2. Restoring factory defaults by software means (NMSiptool level)
NMSip (version 1.23.4 or later) allows to restore factory defaults. To restore settings find camera via
NMSiptool, click right mouse button and choose “ Restore default configuration”. Next, within 30
seconds, it is required to turn the camera power off and on.
6.3 Restore camera default using RESET button
The RESET button is located under the camera cover. To reset the device, remove the top cover and
then hold down the button for about 10 seconds. After this time, the camcorder will return to factory
settings.