NVIP-2DN3033V/IR-1P-II - User’s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
10
2.3. Installation
1.
Remove locking screws from camera base and then remove camera base.
2.
Use the included mounting template or the camera base plate to mark holes for mounting
screws.
3.
Drill mounting and cable holes in previously selected points.
4.
Mount the camera base using screws on smooth surface providing declared degree of IP
protection.
5.
Mount camera to camera base and screw locking screw.
6.
Adjust the position of the camera module. If required, loosen the screws blocking camera
module.
CAUTION!!!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs
START-UP AND INITIAL CAMERA CONFIGURATION
