Novus NVIP-2DN3031V/IR-1P-II, Руководство пользователя

Страница: 17 / 36

NVIP-2DN3031V/IR-1P-II - User’s manual (short) ver 1.0
All rights reserved © AAT Holding S.A.
17
FACTORY DEFAULTS
6. RESTORING FACTORY DEFAULTS
NVIP - 2DN3031V/IR - 1P - II camera allow to restore defaults via:

software (web browser level)

software (NMSiptool level)

hardware (RESET button)
6.1. Restoring factory defaults by software (web browser)
User can restore default settings of the IP camera. To restore to default settings go to: “ Advanced
Config - > Config Backup & Restore ” tab. Process of restoring takes about two minutes.
6.2. Restoring factory defaults by software (NMSiptool)
NMSiptool (version 1.23.4 or later) allows to restore factory defaults. To restore settings find camera
via NMSiptool, click right mouse button and choose
“ Restore default configuration ”. Next, within 30
seconds, it is required to turn the camera power off and on.
6.3. Restoring factory defaults by hardware using RESET button
With the RESET button, user can restore the factory settings by pressing it with the small tool (for
example, the end of the paper clip
)
and holding it for about 10 seconds.
The camera will restart with factory settings.