NVIP
-
2D
-
6502/F Quick start guide version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
START
-
UP AND INITIAL CONFIGURATION
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
2.START
-
UP AND INITIAL CONFIGURATION
1
2
3
4
5
2.1.
Description of connectors
1. 100 Mb/s Ethernet port (RJ
-
45
connector)
2. Audio output (HP)
3. Audio input (MIC)
4. Alarm Connectors
1. Alarm output COM
2. Alarm output
3. Alarm input
4. Alarm input GND
5. Power supply 12VDC
1
2
3
4
5
6
2.2. Description of the camera components
INFORMATION!
To access the above items
(except the microphone), remove the camera
cover.
1. Light sensor
2. Infrared LEDs
3. Lens adjustment levers
4. Reset button
5. MicroSD card slot
6. Build in microphone