Novus NVIP-1DN3040H/IR-1P, Руководство пользователя

Страница: 9 / 36

NVIP-1DN3040H/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding sp. z o.o.
9
2.2 Zoom and focus adjustment
User can adjust camera zoom and focus. It is recommended to check focus settings in infrared
illumination and make correction in color mode to have proper focus in both modes.
2.3. Cameras mounting
To mount a camera please follow the instructions below:
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route the cables to the cable hole and connect the cables.
3. Using included screws mounting base on smooth surface providing declared degree of IP protection.
4. Optionally open service compartment to insert SD card and connect monitor through DCIN/CVBS
cables.
5. Using allen key loosen screws 1, 2 and 3. Then adjust camera position and tight lock screws.
6. Adjust zoom and focus screw until you get the optimum image (after starting IP Camera, details in
chapter 2.4).
START-UP AND INITIAL CAMERA CONFIGURATION
1 2 3
Service compartment
Zoom adjustment Focus adjustment