NVE
-
PV100 –
Instrukcja instalacji. Installation manual.
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
Wszelkie prawa zastrzeżone.
7
IMPORTANT SAFEGUARDS AND WARNINGS:
1.
Prior to undertaking any action please consult the following manual and read all the safety and
operating instructions before starting the device.
2.
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is
necessary;
3.
All the safety precautions referred to in this manual should be strictly followed, as they have a direct
influence on user
’
s safety and durability and reliability of the device;
4.
All actions conducted by the servicemen and users must be accomplished in accordance with the user
’
s
manual;
5.
The device should be disconnected from power sources during maintenance procedures;
6.
Usage of additional devices and components neither provided nor recommended by the producer is
forbidden;
7.
Mounting the device on unstable surface or using not recommended mounts is forbidden.
8.
Improperly mounted device may cause a fatal accident or may be seriously damaged itself. Device must
be mounted by qualified personnel with proper authorization, in accordance with this user
’
s manual;
9.
Device should be supplied only from a power sources whose parameters are in accordance with those
specified by the producer in the device
’
s technical datasheet. Therefore, it is forbidden to supply the
device from a power sources with unknown parameters, unstable or not meeting producer
’
s
requirements;
10.
Signal and power cables should be placed in a way excluding the possibility of damaging them by
accident. Special attention must be paid to cables getting from the device and connecting the power
supply;
11.
Electric installation supplying the device should be designed to meet the specifications given by the
producer in such a way that overloading is impossible;
12.
User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should be
conducted only by qualified service personnel;
Unplug the device from the power source immediately and contact the proper maintenance
department when the following occurs:
•
Damages to the power cord or to the plug itself;
•
Liquids getting inside the device or exposure to strong mechanical shock;
•
Device behaves in a way not described in the manual and all adjustments approved by the
•
manufacturer and possible to apply by user himself, seem not to have any effect;
•
Device is damaged;
•
Atypical behaviour of the device components may be seen (heard).
14.
In necessity of repairs attention to using only original replacement parts (with their parameters in
accordance with those specified by the producer) should be paid. Non
-
licensed service and non
-
genuine
replacement parts may cause fire or electrocution;
15.
After maintenance activities tests should be run to ensure proper operation of all the functional
components of the device.
