NVC-DN6127SD-II and NVC-DN6137SD-II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
11
2. START-UP AND INITIAL NVC-DN61x7SD-II CONFIGURATION
2.1. Description of crucial electrical connectors
NVC-DN61x7SD-II Camera
2.2. Connecting MAIN cable
Power supply should be connected to MAIN cable, as depicted below :
Cable allows to create basic electrical connections for power supply and remote controlling of the
camera.
ATTENTION!
The camera is 24VAC supplied. Minimal required power output for the power supply unit
should be at least 36W. Please pay attention to wire polarisation, as while it is not important
when using AC power supply, it is recommended to connect the same phase to respective
power supply terminals in devices.
START-UP AND INITIAL CAMERA CONFIGURATION
1. I/O - Alarm input/output terminal block
2. MAIN - Main connector ( 24VAC power supply, RS485, BNC monitor output)
24VAC - (POWER +) - red wire
24VAC - (POWER -) - orange wire
