NVC-402C, NVDN-402C 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
11
5. SETTINGS
NVC-402C and NVDN-402C cameras feature the OSD menu. During camera standard operation
status information may be displayed on the screen.
As it has been mentioned before, 5 buttons on the rear panel are dedicated to navigation and making
changes:
In order to enter the menu press the joystick down, which results in executing
ENTER
command. For choosing the submenus please move the joystick into
UP, DOWN
positions. If
a
symbol is present, enter particular sub-menu by pressing the joystick, which is associated with
executing the
ENTER
.
command. To change the parameters use the
LEFT
and
RIGHT
joystick
positions
.
In order to leave the menu select
EXIT
and press ENTER. To exit submenu please select
RETURN
position, and press ENTER. Selecting (via left/right joystick movement) END in the
ENTER
position closes the menu and leaves to main camera view.
5.1. Remote navigation by coaxial cable using optional remote controller NC-RCUTC.
The camera can be navigated remotely by optional controller NV-RCUTC connected by the coaxial
cable. It allows to control from few hundred meters from the camera (e.g. it could be connected next
to recorder). Menu navigation via remote controller is the same as for buttons described above.
SETTINGS
ENTER
LEFT
DOWN
UP
SET
RIGHT
LEFT
DOWN
UP
ENTER
RIGHT
Содержание NVC-402C
Страница 1: ...user s manual NVC 402C NVDN 402C ...
Страница 19: ...NVC 402C NVDN 402C instrukcja obsługi ...
