Novus NVAHD-2DN5204MV/IR-1, Руководство пользователя

Страница: 8 / 36

NVAHD-2DN5204MV/IR-1 - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
8
SETTINGS/INSTALLATION
4.1. Power supply connection
NOTE: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by producer in the camera’s technical datasheet. Therefore, it is
forbidden to supply the camera from power sources whose parameters are unknown, unstable or
not meeting the producer’s requirements.
5. SETTINGS
The camera has an OSD menu displayed in the foreground of image. During normal operation status
information can be displayed on the image. To navigate menu and make changes please use
joystick located on the cable of the camera:
To enter the menu, press the joystick, which sends ENTER command to the device. To choose
submenu, select the UP, DOWN (UP, DN) directions. If the sub-menu contains the symbol

that
indicates the opportunity to enter to the settings by pressing the ENTER key. To change the
parameters of selected items, press LEFT, RIGHT buttons. To exit the menu and saves changes, select
EXIT and next select SAVE & END. By selecting RESET you can restore the factory settings, and by
selecting NOT SAVE you can exit the menu without saving changes. To exit the submenu, select
RETURN and press ENTER. Choosing (with left or right button) SAVE & END in the RETURN
position saves changes and closes the menu.
Camera mode settings
Camera got four video modes: TVI, AHD, CVBS and CVI. Depends on used DVR. User need to set
DIP switches according to the picture:
Video
(GND)
+
- (GND) Power Supply 12V DC +/- 10%
Video