Novus NVAHD-2DN5104MH/IRH-2, Руководство пользователя

Страница: 9 / 28

NVAHD-2DN5104MH/IRH-2 - ver. 1.0 - User’s manual
All rights reserved © AAT Holding S.A.
9
SETTINGS
5. SETTINGS
5.1 Changing the operating modes (switching between AHD, CVI, TVI, analog 960H)
5.2 Controlling the camera menu
The camera has an OSD menu displayed in the foreground of image. To navigate menu and make
changes, you can use the joystick built into the camera cable, the optional UTC remote control, or
PTZ function on the Novus AHD recorder.
5.2.1 Operation of the camera menu using the joystick
5.2.2 Operation of the camera menu using the UTC controller
5.2.3 Operation of the camera menu using the PTZ function in the Novus AHD recorder
In order to be able to control the camera's functions, please select COAX protocol in the DVR: in the
Device section of the DVR menu, in the PTZ tab select the channel corresponding to the camera, then
select the COAX protocol for this channel and save the changes.
To enter to the camera menu, press the joystick, which sends
ENTER
command to the
device. To choose submenu, select the
UP, DOWN
directions. If the sub-menu
contains the symbol
 
that indicates the opportunity to enter to the settings by
pressing the
ENTER
key. To change the parameters of selected items, press
LEFT,
RIGHT
buttons.
Operation of the camera menu using the optional remote control is possible only when the
camera is running in AHD 1080p, AHD 720p or analog 960H mode.
To change the camera operating mode, use the joystick built into the cable. Switching between
AHD, CVI, TVI and analog 960H modes is done by tilting the joystick in the appropriate direction
and holding it for about 5 seconds.
To activate the analog 960H mode, tilt the joystick right, TVI mode - left, CVI mode - down, AHD
mode - up.
The default (factory) operating mode of the camera is 1080p AHD.
The above description applies to the optional Novus remote controller, model NV-RCUTC-35HD
(available separately).
To enter to the camera menu, press the
OK
button, which sends
ENTER
command to
the device. Select the
UP, DOWN
directions, to choose submenu. Press
LEFT, RIGHT
buttons, to change the parameters of selected items.