Novus NVAHD-2DN5104H/IRH-2, Руководство пользователя

Страница: 9 / 36

NVAHD-2DN5104H/IRH-2 - ver. 1.0 - User’s manual
All rights reserved © AAT Holding S.A.
9
SETTINGS
5. SETTINGS
The camera has an OSD menu displayed in the foreground of image. During normal operation
status information can be displayed on the image. To navigate menu and make changes please use
joystick located behind service compartment door:
To enter the menu, press the joystick, which sends
ENTER
command to the device. To choose
submenu, select the
UP, DOWN (UP, DN)
directions. If the sub-menu contains the symbol

that
indicates the opportunity to enter to the settings by pressing the ENTER key. To change the
parameters of selected items, press LEFT, RIGHT buttons. To exit the menu and saves changes,
select EXIT and next select SAVE & END. By selecting RESET you can restore the factory settings,
and by selecting NOT SAVE you can exit the menu without saving changes. To exit the submenu,
select RETURN and press ENTER. Choosing (with left or right button) SAVE & END in the
RETURN
position saves changes and closes the menu.
Controlling the camera menu is also possible using an optional UTC remote
control model NV-RCUTC-35HD (sold separately).
Press the OK button to enter to the camera menu, which sends
ENTER
command to
the device. Select the
UP, DOWN
directions, to choose submenu. Press
LEFT,
RIGHT
buttons, to change the parameters of selected items.
NOTE:
In case of the image failure after connecting camera, or video loss due to changes in the menu, it
is possible to restore the factory settings. Following procedure is also recommended when
camera menu is not working. To restore factory settings:
1. Turn the power off and on again.
2. If the picture does not appear, perform the following sequence of joystick keys: press ENTER,
UP, RIGHT, press ENTER.
Successful completing these steps restores factory settings (AHD 1080p, PAL).
Additional Video Out Port
IR light intensity adjustment
OSD setup joystick