Novus NVAHD-2DN3201MH/IR-1-PIR, Руководство пользователя, Страница: 14 / 32

NVAHD - 2DN3201MH/IR - 1 - PIR - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
14
SETTINGS
Here you can specify the size and location of the zone in which the correction will be made
(position
POS/SIZE
), then define the level of correction and amplification (
LEVEL
and
AGC
positions) and set
SENS -
UP option (if camera uses
SENS - UP
position). Then select
START
position and give
ENTER
command, cover the lens tightly and give
ENTER
command again.
After correcting process the camera returns to the
DPC WHITE
menu. In the
DPC VIEW
you can
check the correction effect and, if needed repeat the operation with different settings.
BLACK DPC
- allows to correct (mask) dead pixels. Selecting ON and giving
ENTER
command
opens a submenu which define the size and location of the zone in which the correction is made
(position POS/SIZE), then define the compensation level (position LEVEL). Then select
START
position and give
ENTER
command and wait for the end of the operation. In the
DPC
VIEW
check the correction effect and, if needed repeat the operation with different settings.
LANGUAGE
- switches between OSD languages: Polish, English, Russian and others
5.1.7
ADJUST
submenu
It allows to perform additional image adjustment. Giving the
ENTER
command in this mode displays
the following menu:
SHARPNESS
- allows to disable (
OFF
) and enable (
AUTO
) sharpness correction function. After
selecting
AUTO
and giving the
ENTER
command , next submenu is displayed, where it is possible
to set the degree of correction and gain ranges for compensation
MONITOR
- corrects the image parameters depending on chosen monitor (LCD monitor or CRT
monitor). After giving the
ENTER
command, the submenu is displayed where fine adjustments can
be made.
LSC
- enables and disables the vignetting correction function.
OUTPUT MODE
- switches the system and camera mode. After issuing the
ENTER
command, the
next submenu will appear: