Novus NVAHD-1DN5101H/IR-1, Руководство пользователя

Страница: 7 / 32

NVAHD-1DN5101H/IR-1- ver. 1.1 - User’s manual
All rights reserved © AAT Holding S.A.
7
3.1. Dimensions:
3.2. View of the camera, layout of the camera items:
4. INSTALLATION
Make sure the location can support 5 times the total weight of the bullet camera. Be careful not to jam
or peel insulation covering of the cable. This may result in malfunction or a fire hazard.

Using the template, mark the position of the mounting holes

Drill holes for the mounting screws and the hole for video and power cables

Pass the power and video cables through the hole in the base of the camera

Pass the cables through a previously prepared in the ceiling/wall hole

Using screws included in the box, attach the base of the camera to the ceiling/wall

Adjust the position of the camera and the lens hood and then lock them with position with
suitable screws/nuts.

Make the appropriate camera settings via the OSD menu
NOTE:
It is possible to switch camera into analog 960H mode, which is e.g. compatible with service
monitor. To change mode tilt the joystick to the left and hold for about 5 seconds. To return to
the AHD mode, tilt the joystick to the right and hold for about 5 seconds. The default mode of
the camera is AHD mode.
By pressing and holding the joystick down (DN) camera switches between PAL and NTSC
systems. The default operating mode of the camera is PAL.
SPECIFICATION/INSTALLATION
Locking screw
Vertical adjustment
Horizontal adjustment
Rotation adjustment