NHDR
-
6016
-
H1
-
II
Quick start guide
version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O.
14
3.4. Wizzard setup
When the NHDR is started for the first time, the settings wizard window is displayed. In order to
properly configure the recorder, please follow the procedure given:
Information:
Recommended setting values for cameras can be found in the "Camera compatibility table" available
at www.novuscctv.com. If you set the wrong values, you may not be able to find, connect cameras or
get a smooth image without distortion.
Before you start working with the network recorder, you should perform the initial configuration of
the device. Click the WIZARD SETUP button to start the wizard
I. By default, the recorder has the IP address and DNS settings download from the DHCP server
enabled. If the address retrieval fails, the recorder is available at 192.168.1.100 with the subnet mask
of 255.255.255.0. The displayed menu allows you to change the settings after uncheck the GET IP
ADDRESS FROM DHCP box and the GET DNS AUTOMATICALLY field. The following network
recorder settings are available, such as: IP (default 192.168.1.100) Subnet mask (default setting is
255.255.255.0). If the NHDR needs to be connected to the Internet (for remote access, sending emails,
etc.), the IP addresses for Gateway and for Primary and Secondary DNS. You can change the default
HTTP and HTTPS ports intended for displaying the device's web panel as well as RTSP ports and
server data port. The parameter changes should be confirmed with the NEXT button
NHDR OPERATING
