NHDR
-
4104
-
H1, NHDR
-
4108
-
H1
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
Then unscrew the screws on the sides and back of the housing in the places shown in the photo below.
Remove the recorder housing by sliding it backwards and then lifting it up.
SATA and power cables are connected to the mainboard by default and ready to connect HDD. Put the
HDD at the shown place.
Rotate DVR to the side holding HDD by hand, and screw it tightly from the bottom.
STARTING THE DEVICE
HDD