NHDR-3204AHD, NHDR-3208AHD
User's manual (short) ver. 1.3
All rights reserved © AAT Holding S.A.
9
Before staring the process make sure the power supply isn’t connected.
In order to mount HDD, unscrew screws on the back and both sides as depicted below and remove top
cover.
Depending the model follow the instructions:
NHDR-3204AHD
SATA and power cables are attached to the mainboard. Put the HDD at the shown place.
Move DVR to the side holding HDD by hand, and screw it tightly from the bottom.
STARTING THE DEVICE
HDD
