Novus ndr-ba3208, Руководство пользователя

Страница: 18 / 44

NDR-BA3208,NDR-BA3416
User’s manual ver.1.1 (short)
All rights reserved © AAT Holding sp. z o.o.
18
To disable LOGIN window display during next start-up, please go to the MAIN MENU / BASIC /
SYSTEM and check off the Password Check.
To prevent unauthorized access, it is recommended to log out when you leave the screen. In the
monitoring screen, click
MENU in the bottom left corner and select LOG OFF .
To shutdown DVR you should click MENU in the bottom left corner of the screen and press
SHUTDOWN, or press the POWER button on the remote control.
Detailed information about configuration of recorders available in full version of user's manual
located on the attached CD-ROM and at the www.novuscctv.com website
Note:
If you turn off the system in an abnormal manner such as removing the power cord while the system
is in operation, the disk may acquire or increase the numbers of bad sectors, causing data loss and
shortened life cycle of the disk.
4.3 Configuring IP camera channel
It’s strongly advisable to configure IP camera with PC computer and check DVR network
configuration before connecting camera to DVR.
To configure IP address for DVR select MAIN MENU / SETUP / NETWORK / NETWORK
If you are using DHCP sever for IP address management select OBTAIN IP ADDRESS
AUTMATICALY check box. If you are not using dhcp server uncheck this box
To configure IP settings manually you use the following fields.

IP Address - to set DVR IP address ( by default 192.168.1.100)

Subnet mask - to set IP subnet mask (by default 255.255.255.0)

Gateway - to set gateway (by default 192.168.1.1) - not needed if DVR and camera are in the
same IP network
Press APPLY button to save the settings.
Note :
Before configuring IP camera channel make sure that DVR and IP cameras addresses and subnet
mask of the DVR and the IP cameras are in the same network
subnet (e.g. for the NVR IP address 192.168.1.100, and mask 255.255.255.0 appropriate address for
the camera ranges from 192.168.1.1 to 192.168.1.254, for example 192.168.1.201). It is not allowed
to set the same addresses for multiple devices
RECORDER’S MENU