AirGate-3G
NOVUS AUTOMATION
93/119
Test @ Tools
Item
Description
Default
Enable
Click “Enable” to select the hardware component whose status you want to check.
Enable
Description
Select from “SD Test”, “USB Test”, “Flash Test”, “Memory Test”, “Ethernet Test”, “SIM1
Test”, “SIM2 Test” and “Module Test”.
N/A
Result
Show the current status of the selected hardware component. There are 3 status
“Testing”, “Success” and “Failure”.
Testing: Router is testing the selected hardware component.
Success: Correspond hardware component is properly inserted and detected.
Failure: Correspond hardware component is not inserted into the router or the router
fails to detect.
Null
Show Detail
Show the current test details of the hardware component.
Null
Clear
Clear the current test details of the hardware component.
Null
Note
: click “Apply” to start testing.
3.46
ADMINISTRATION -> CLOCK
This section allows users to set clock of router and NTP server.
Clock
Item
Description
Default
Real Time Clock
Router’s RTC can be showed and modified in this field.
Null
PC Time
You PC’s time can be showed here.
Null
Synchronize
Synchronize router’s RTC with PC.
Null
Enable NTP Client
Enable to synchronize the time from NTP server.
Disable
Timezone @ Client
Select your local time zone.
UTC
+08:00
Sync Time From GPS @
GPS Time
Synchronization
Synchronize router’s RTC from GPS.
Disable
Primary NTP Server
Enter primary NTP Server’s IP address or domain name.
pool.ntp
.org
Secondary NTP Server
Enter secondary NTP Server’s IP address or domain name.
Null
Update interval (h)
Enter the interval which NTP client synchronize the time from NTP server.
1
