3 |
P a g e
Novomatic Americas Sales LLC
- 1050 E. Business Center Drive, Mount Prospect, IL 60056 - Illinois - USA
Phone: +1(224) 802-2974 - Fax: + 1(224) 500-3305 - www.novomaticamericas.com
Support: +1(833) 668-6628 - Support: [email protected]
Turn the audit key (leave in the horizontal position) to enter the audit menu where the following screen will be displayed:
•
Press the
Factory Default Ram Clear
button to perform the RAM-Clear.
After the RAM-Clear is successfully completed the following message will be displayed.
Note:
If you do a PARTIAL RAM CLEAR that will allow you to change any parameters, but if is pressed all soft
meter will be erased.
After this message you can pull out the ram clear USB (while machine is still on) and turn the attendant key off and remove.
The machine will reboot after the machine reboots insert the attendant key, turn to the on (horizontal) position and leave in.
Press BACK to go to the Main setup screen. Select Machine Setup
Note: When a selection is made the word or value will change to yellow
1. Limit Settings
