Novolink Lightscape LS-101B-WLVCTL, Инструкция по установке и эксплуатации

Страница: 15 / 24

27 26
3. Replace the rear plate.
Twist until it locks back
into place.
2. Insert (3) AA batteries.
Match the direction of the
polarity markings (+) (−).
CAUTION:
do NOT open, shor t
circuit, or mutilate batteries as
injur y may occur. do NOT mix
old and new batteries. do NOT
mix alkaline, standard (zinc-
carbon), or rechargeable (Ni-Cd,
Ni-Mh) batteries.
IMPORTANT:
dispose of
batteries in accordance
with local, state, and federal
regulations.
AA 1.5V
AA 1.5V
AA 1.5V
O
pe
n
Mount the Sensor
The Motion Sensor can be mounted onto a wall, or staked to the
ground. (Cradle, stake, and pole sold separately.)
Mounting to the Wall
1. Choose a suitable location 4 to 6 ft. above the ground, where
you’d like the sensor to detect motion and activate the light.
4 ft.
6 ft.