TRIOPOD-PRO75
with 3x QLEG C2820
QLEG CE50P
QLEG C3930
QLEG C3940
QLEG C2820
Optional Leg Extensions
All legs can be extended by optionally available 50 cm (19.7 inches) long carbon fiber ex-
tension legs called
QLEG CE50P.
In this way a maximum working height of approximately
2 m (79 inches) can be reached. With the help of the optional geared center column TRIO
CC-PRO75 this height can be extended by another 35 cm (14 inches).
Page 3
Alternative Tripod Legs
The TrioPod PRO75 tripod shoulder can not only be combined with the legs of the PRO
series, but also with all legs of the whole TrioPod system, which makes the tripod extremely
flexible, even though with lower payload, when using these smaller legs.
The carbon legs
QLEG C3930
and
QLEG C3940
were specially
developed for the TrioPod PRO75.
They differ in the number of seg-
ments (3 or 4) and the pack size
(60.5cm or 50cm / 24 in. or 20 in.).
The maximum length is 161cm (63.4
in.) for both models.
For extreme loads and maximum
stability, the short carbon legs
QLEG C2820
with a length of
26.5cm - 42.5cm (10 in. - 17 in.) and
two segments are recommended.
These legs are the ideal choice
when working near-ground and,
because of there low length, yet
they are extremely sturdy. All legs
are equipped with removable steel
spikes with 3/8“ threads, which are
covered by rubber feet.
Page 10
Configuration examples and possible applications
TRIOPRO C3940 with
TRIO CC-PRO75, CB5 II,
Q=BASE and QPL-VR PRO
TRIOPRO C3940 with
CB5 II and Q=BASE
TRIOPRO C3940 with
TRIO B-PRO75 and
a third-party half-ball
socket and tripod head
TRIOPRO C3930 with
MBAL-PRO75 and
VR-SYSTEM PRO II
