26
27
Remove PCBs by
removing the
screws shown in
the picture
Step 1
Step 2*
Unplug the
power from the
wall socket.
Remove 2 screws and
clips from bypass.
Disconnect the
meter cable from
the bypass.
Grey Meter Cable
60010267
Step 3
Remove Cover.
Step 4
Step 5
Disconnect the cables from the
front PCB display.
Remove
strain relief
with pliers.
PCB display
Step 6
Replace the
old cable
with the
new Cable.
60095101
Bypass comes with Meter
and Grey Meter Cable
*
NOTE
Water to the household
needs to be turned off
and pressure relieved
before Step 2
If there are “TB-L” and “TB-H” meter type options in PCB programming, select “TB-H”.
If the valve programming has no “TB-L” and “TB-H” options, change the meter ratio to the
new value as per chart below
*
:
For 65 Series Valves press UP+DOWN for 3 seconds to get to Factory Settings
For 465/565 Valves press SET/REGEN.+UP+DOWN for 3 seconds to get to Factory
Settings.
Press the
SET
to step through to PROGRAMING COMPLETE and past this until TIME OF
DAY screen appears.
Step 7
Valve
Region
Meter
Ratio
165
U.S Gallon
4.443
Assemble the valve.
Plug the power supply
back into the wall socket
and follow the programming
shown on right:
REPLACING THE BYPASS AND METER CABLE
