Novis ProCair Prime Скачать руководство пользователя страница 8

8

User Guide ProCair Prime

Protection Against Hazards

Fluids

Avoid fluid contact on any part of the control handset 
or control unit, by keeping mattress top cover zipped 
closed and the waterfall skirt down. If spills do occur:

 

Turn off control unit power and disconnect the 
unit from mains electricity supply.

 

Immediately clean fluids from the casing by 
wiping with a soft cloth.

  Ensure there is no moisture in or near the power 

inlet, control handset and power cord before 
reconnecting the power supply.

  Check the operation of controls and other 

components around the spill area.

  Fluid or liquid remaining on the electronic 

controls can cause corrosion that may cause 
the electronic components to fail. Component 
failures may cause the unit to operate erratically, 
possibly producing potential hazards to patient 
and carers.

Explosion Hazard

Equipment is not suitable for use in the presence of 
a flammable anaesthetic mixture with air, oxygen or 
nitrous oxide.

 

Do not use in the presence of smoking materials 
or open flame – air flowing through the mattress 
will support combustion.

 

Do not open the control unit – risk of electrical 
shock. Refer servicing to qualified service 
personnel.

 

Disposal

Dispose of all components (control unit including 
batteries, air filter, air cells, mattress cover and base) 
according to local procedures and regulations or 
contact Novis Healthcare for advice.

Power Cord

Periodically inspect the power cord for damage. 
The system should never be operated with a worn 
or damaged power cord. Keep the cord away from 
heated surfaces. Should the power cord be found to 
be worn or damaged, contact Novis Healthcare for a 
replacement.

Interference

Although this equipment conforms to the 
intent of directive IEC 60601-1-2

1

 in relation to 

Electromagnetic Compatibility, all electrical 
equipment may produce interference. If interference 
is suspected, move equipment away from sensitive 
devices or contact Novis Healthcare. 

1

 

 IEC 60601-1-2. Medical Electrical Equipment - Part 1: 
General Equipments for Safety, Amendment No. 2. 
Collateral Standard. Electromagnetic Compatibility 
Requirements and Test).

Safety Precautions

Содержание ProCair Prime





























Отзывы: