Novis Premium8 Digital, Руководство пользователя

Страница: 19 / 28

19
cleaning
light soilage
Superficial dirt on the coating may be removed
by wiping with a soft cloth moistened with water
containing a neutral detergent. More persistent
contamination may be treated by wiping with alcohols
or turpentine substitute, followed by hot water and
detergent.
Routine cleaning and disinfection in situ may be
carried out on the cover with warm water and a
neutral detergent or with a sodium hypochlorite
solution (0.1% or 1,000 parts per million available
chlorine).
Decontamination: For the decontamination of blood
spills or heavy soilage
The material is compatible with 10,000 ppm available
chlorine in solution. After the 2 minute required dwell,
excess solution must be removed and the surface
thoroughly rinsed and dried prior to reuse or storage.
Proprietary disinfectants may be used provided
manufacturer’s instructions are followed.
All cleaning agents, and disinfectants, must be
thoroughly rinsed off and the item dried before
storage. Failure to do this may result in the
accumulation of reagent that could damage the
polyurethane coating, react with the bed frame, or
negate the biocompatibility properties of the fabric.
storage
Store in a cool, dry area. Avoid excessive pressure and
contact with non-colourfast materials.
control unit
WARNING: Ensure the Control Unit is
disconnected from the mains electricity supply before
cleaning.
WARNING: Do not spray disinfectant directly on
to the Control Unit, or immerse the Control Unit in any
type of fluid. This could pose a severe electrical hazard
as this equipment has no protection against ingress
of water.
Wipe down Control Unit with warm water containing
detergent (or with a solution up to 10,000 ppm of
Sodium Hypochlorite or similar) and dry thoroughly
before use.
top cover: wiping by hand and disinfection