8
User Guide
BetterLiving
System Preparation
Hang the control unit over the foot end of the
bed, using the in-built spring loaded hanging
hooks. Pull the hooks by the rubber tabs to
prevent accidentally trapping your fingers.
Ensure it is secure before use; failure to do so
could result in equipment damage.
Connect the umbilical connectors to the
corresponding sockets on the side of the
control unit. Listen for a click as confirmation
the connector is locked in place.
Straighten any twists in the
umbilical air hoses.
Ensure the umbilical air hose is not
trapped between the mattress and bed.
Feed power cord through the cord retention
loops along either side of the mattress base.
Insert power cord base into the side of the
control unit, then plug into an appropriate
electrical outlet and switch on mains power.
The Power indicator will glow amber,
confirming the control unit is connected to a
power source.
Ensure the power cord is not under strain;
is free from obstruction; and is secured
safely so as not to be a trip hazard.
