Novik Neo NOVOD 1600, Руководство пользователя, Страница: 4 / 24

www.
novikneo
.com 4
PANEL INSTRUCTIONS
Front Panel
1. Main Power Switch
When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4
seconds, there will be a clicking denote that soft start finished. And more 1-2 seconds
later, there will be another “clicking”, the amplifier is connected with speaker and
ready to work.
2. Channel A / Channel B Input level control
Adjust it to get the volume desired.
3. Channel A / Channel B Protection indicating led
This led will light up when the amplifier is running un-stable or went in to thermal
protection after the power elements temperature over 90°.
4. Clip led
Turns on just before the maximum, distortion free, output level of the amplifier. The
clip leds may turn on shortly from time to time but they may certainly not turn on for
longer periods. In this case you have to turn the output level down.
5. Signal led
The green signal led indicates that a music signal is present at this channel input.
6. Bridge mode indicating led
Indicate the amplifier is working under BRIDGE mode, the indicator is lighten, and the
input signal acts on CH.A and CH.B
7. Stereo mode indicating led
These green led will light up while the input signal is connected, the amplifier is
working under stereo mode.
1 2 6
3 4 5
7 2