02/17 Rev. 02
SERVICE MANUAL
Attachment, Setup, Service
Rewinder
2000
29
Light barrier wedge
Tool
–
Screwdriver,
small
Disassembling/assembly
1. Disassembling the light barrier.
More detailed information can be found
in the section
2. Remove the retaining ring and light
barrier wedge (1).
Tension spring
The tension spring (2) returns the dancer arm
to the zero position.
Disassembling/assembly
1. Disassembling the light barrier and
More detailed information can be found
in the corresponding sections.
2. Remove the spacer spring (3).
3. Detach the tension spring (2) at the
bottom (4).
4. Pull the spring holder (5) off the axle (6).
Dancer arm
Disassembling/assembly
1. Disassembling all parts up to the section
"Tension spring", step 4.
2. Remove the retaining ring (7) and
dancer arm.
Guide roller
Tool
–
Screwdriver,
small
Disassembling/assembly
Remove the retaining ring (8) and guide
roller (9).
1
2
7
3
9
6
4
5
8
