Novexx Solutions XLP 504, Руководство по обслуживанию

Страница: 179 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 04 179 Malfunctions
Malfunctions
STATUS REPORTS
General information about status reports
Display of status reports
During operation, tests are continually carried out to determine whether a malfunction has oc-
curred. If a malfunction is detected, the corresponding status report appears on the display.
The status report shown on the display is assembled as follows:
[158] Appearance of status reports
A Status number
B Status text
C Category
D Check mark (marks the acknowledgement key)
E Background color (red = error, yellow = warning)
The status number [158A] is the key to an error description that can be found in chapter Reference
of status reports

on page 181. The example shows the message with status number 5063 Lever
open

on page 201.
The status can also be queried over the serial interface (see Easy Plug command #!Xn).
Warnings
Background color = yellow
Warnings inform the operator about the occurance of a certain event at the printer. The message
is only displayed for a short time. The printer continues operating without intervention from the user.
[159] Example of a warning
Error messages
Background color = red
Error messages have to be acknowledged by the operator, because the incident endangers the
normal operation. The message is displayed until the cause of the disturbance is eliminated and
the message is acknowledged by pressing key 4.
A
B
C
D
E