Operating manual
LTSA LTMA
LTSA/LTMA INSTALLATION
Describes how the LTSA is installed on the “XLP 504 for LTSA” and the LTMA is installed on the
“XLP 514 for LTMA”.
Before you begin
• XLP 504 for LTSA or XLP 514 for LTMA is available
• LTSA or LTMA is available
Tools:
• Hex socket driver 4 and 6 mm
Procedure
1.
(Optional) If present, unscrew cover (1) of the mounting flange.
2.
(Optional) If present, unscrew enclosure part (2) at front bottom.
3.
LTSA/LTMA bolt with adapter plate (2) to the flange of the printer.
(2 screws DIN 912 M8 x 20 from the scope of supply of the LTSA/LTMA)
4.
Connect sub-D connector (3) to the printer.
Edition 02 - 7/2021
21
Commissioning
LTSA/LTMA Installation
