04/13 Rev. 1.12-02
USER / SERVICE MANUAL
Mounting/Setup
LA-TO / LA-TO XL
Assembly
18
Exchanging the vacuum plate
The LA -TO can be equipped with vacuum plates in 4
sizes. The size of the vacuum plate limits the size of the
max. applicable label.
Tool
4 mm hex socket key
Removing/Assembling the vacuum plate:
Remove the 4 screws [24B] at the applicator foot.
Remove the vacuum plate.
Assembly: The vacuum plate must be turned in a
way, that the hole [23A] is placed under the vacuum
valve [24C].
Vacuum plate (L x W)
Article no.
80 x 80 mm
A9413
125 x 125 mm
A9420
160 x 110 mm
A9415
210 x 160 mm
a
a) Suitable for DIN A5 size labels.
A9410
[Tab. 2] Measures and article numbers of the available
vacuum plates.
[22] Vacuum plates 160 x 110 mm (A) and 210 x 160 mm (B).
[23] Rear sides of the vacuum plates.
[24] Mounting the vacuum plate (210 x 160 mm).
B
A
A
A
A
B
C
A
B
C
D
