Novexx Solutions ALX 92x, Руководство по обслуживанию

Страница: 588 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
66
FTP server
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
The File Transfer Protocol (FTP) server (RFC959) allows access to the inter-
nal RAM disk of the printer and, if available, to the memory card. The FTP
server is capable of multisession mode, without evaluating the user name
when logging in. The password must match the set password (see below).

For further information read the user manual, topic section „Advanced Appli-
cations“, chapter „Data transmission with FTP“.
On
Switches the FTP server on .
Off Switches the FTP server off .
FTP password
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6

Parameter only appears in production mode.
Input of the FTP server password by means of a connected keyboard or the
printers operation panel. Default setting: „novexx“.
Changing the password:
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
Acknowledge by pressing the Online button.
3. Put in the next character.
4. Acknowledge the new password by pressing the Online button.
WEB server
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
The web server may be used to
•
read out or change parameter settings of the printer with a web browser
•
operate the printer via a web browser.

The WEB server is not multi-session capable, what means that only one
user at a time can be logged in.
Requirements for use of the web server function:
•
Printer is connected to network
•
A valid IP address is assigned to the printer (by the network administrator or
by a DHCP server)
•
INTERFACE PARA > NETWORK PARAM. > WEB server
must be set to „On“.
Starting the web server:
1. Write down the printers IP address (
INTERFACE PARA > NETWORK PARAM. >
IP address
).
2. Start the web browser.