Novexx Solutions ALX 92x, Руководство по обслуживанию

Страница: 203 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
5
Key Combinations
Access to certain of the printer’s functions should be reserved for authorised
service technicians. Access to these functions has been restricted. In order
to access them, the operator must restart the printer while pressing a specific
key combination for several seconds.
Service Data
The status printout "Service status" lists the printer’s main service data.
Some of the counters contained in this function are incremented automatical-
ly, for example, the running time of the printhead. Other counters, such as the
number of printhead replacements, need to be incremented manually by the
service technician. This is done by using the appropriate parameter.
(Tab. 2).

Complete counter reset: Call up
SERVICE FUNCTION > Serv. data reset
.
Key
combination Function Described in
Cut+Prog H8 forced reset Topic "Firmware", section "Load
Firmware (via Bootloader)"
Feed+Prog Provides access to
special service
parameters. Topic "Info-Printouts and Parameters",
section Parameter
SYSTEM PARAMETER >
Access authoriz.
.
Cut+
Feed+Prog H8 forced reset plus
access to special
service parameters see above
[Tab. 1] Special startup key combinations for authorised service technicians
Menu Parameter Use to
SERVICE
FUNCTION
Service Increment "service calls" counter
Head exchange Increment "head number" counter
Roller exchange Increment "feed roller no." counter
Cutter exchange Increment "cutter number" counter.
Serv. data reset Reset all counters to their initial value.
[Tab. 2] These parameters increment the relevant counters for the info printout "Service
Status".