Novexx Solutions 64- series, Руководство пользователя

Страница: 7 / 21

01/13 Rev. 5.05-01 USER MANUAL Attachment, Setup
Rewinder 2000
7
Setting up TTX 350 / TTK
Setup the printer for rewinder-use by performing the three subsequently
described steps:
1. Activating the rewinder / Selecting the Rotation Direction on page 7.
2. Setting the sensor current on page 8 .
3. Adjusting the sensor on page 9.
How to perform the steps is explained in the following.

A complete description of the parameters can be found in the chapter "Info
Printouts and Parameters" in the User Manual of the printer.
Activating the rewinder / Selecting the Rotation
Direction

CAUTION! - Selecting a non-existent option can cause the device to
malfunction!
Action Display Note
1. Connect the printer
and switch it on
OFF
2. Press the CUT+FEED
button
INFO
3. Repeatedly press the
CUT button until
SYSP
4. Press the ENTER
button
EMUL
5. Repeatedly press the
CUT button until
PEPH
6. Press the ENTER
button
NONE
If a peripheral device has previously not been
set.
7. Repeatedly press the
CUT button until
RWND
Direction of
rotation 8a. Press the ENTER
button
DIRL
Step 8a for direction of rotation left.
8b. Press the CUT button DIRR
Step 8b for direction of rotation right.
9. Press the ENTER
button
The printer restarts.
The rewinder is now activated. Other previously activated options are
automatically deactivated (see parameter PEPH).