Novell ZENworks Application Virtualization 8.0, Руководство пользователя

Страница: 22 / 38

22 Novell ZENworks Application Virtualization 8.0 Integration and Streaming Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
This process captures the first snapshot image. Snapshotting iterates through the file system
and registry, and might take several minutes to complete.
4 (Optional) Click the down-arrow on the bottom of the Capture Before button, then click Save
Snapshot .
Saving the first snapshot lets you skip this step when snapshotting subsequent applications
from the same clean machine image.
5 Install Novell OpenOffice.org on the clean machine.
You can download Novell OpenOffice from the
Novell Downloads page (http://
download.novell.com) .
6
Click Capture and Diff in the Snapshot section of the Virtual Application ribbon.
7
Browse to and select the destination folder to store the snapshot, then click OK .
This process captures the second snapshot, computes the delta between the two snapshots, and
populates the virtual application with the delta entries. This process might take a few minutes.
8 (Optional) Click the Filesystem button on the left side of the ZENworks Application
Virtualization console to review the file system and registry entries.
You can remove any files or settings that are not required for proper execution of your virtual
application. Removing unused entries reduces virtual application size. However, accidental
removal of a required resource might cause your virtual application to not function properly.
9
(Conditional) If you use ZENworks Configuration Management in your environment and you
want to control how virtual applications are used or to create and publish ZENworks bundles,
click the
ZENworks button on the left side of the ZENworks Application Virtualization console
to display the ZENworks options.
For more information, continue with the instructions in
Appendix 5, “Using Virtual
Applications with ZENworks Configuration Management,” on page 25 .
10
From the Startup File drop-down list, select the
quickstart.exe
file.