Novell Sentinel Rapid Deployment 6.1, Справочное руководство

Страница: 25 / 136

Sentinel 6.1 Rapid Deployment Control Center User Permissions
2
25
no
vd
ocx
(e
n)
13
Ma
y 20
09
2
Sentinel 6.1 Rapid Deployment
Control Center User Permissions
Sentinel
TM
allows administrators to set user permissions in the Sentinel Control Center at a granular
level. The only user created by default is the
admin
, or Sentinel Administrator. All other users are
created by the Sentinel Administrator, or someone with similar permissions.
The permissions in the User Manager are grouped into several major categories:
Each of these groups of settings are described in the following sections:
Š
Section 2.1, “Changing User Permissions,” on page 25
Š Section 2.2, “General,” on page 27
Š
Section 2.3, “Active Views,” on page 28
Š Section 2.4, “iTRAC,” on page 29
Š
Section 2.5, “Incidents,” on page 30
Š Section 2.6, “Integrators,” on page 30
Š
Section 2.7, “Actions,” on page 31
Š Section 2.8, “Event Source Management,” on page 31
Š
Section 2.9, “Analysis Tab,” on page 32
Š Section 2.10, “Administration,” on page 32
Š
Section 2.11, “Correlation,” on page 33
Š Section 2.12, “Solution Pack,” on page 33
Š
Section 2.13, “Identity,” on page 33
Š Section 2.14, “Reporting,” on page 34
Š
Section 2.15, “Downloading,” on page 35
Š Section 2.16, “Java Webstart,” on page 35
2.1 Changing User Permissions
1
Log into the Sentinel Control Center as a user with the User Management permissions.
2 Click the Admin tab.
3 Select User Configuration from Admin tab. Alternatively, Select User Manager from User
Configuration in the Navigator.