4
Novell Sentinel 6.1 SP1 Hotfix 2
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Sentinel Collector Builder
Sentinel Data Manager
Solution Designer
5
Stop the Sentinel service running on the machine:
On Windows: use Windows Service Manager to stop the Sentinel service.
On Linux/Solaris: run the
$ESEC_HOME/bin/sentinel.sh stop
command.
6
Open the command prompt.
For most Windows systems and Linux/Solaris, you can log in as any user to open the prompt.
For Windows Vista, you must open the command prompt as an Administrator, using the
following instructions.
6a
Go to
Start > All Programs > Accessories
.
6b
Right-click
Command Prompt
and select
Run as administrator
.
If User Access Control is enabled and you are logged in as a user with administrator
privileges, a User Access Control window appears to notify that Windows needs your
permission to continue.
6c
Click
Continue
.
If you are logged in as a user without administrative privileges, then you are prompted to
authenticate as an administrative user.
7
On the command line, return to the extracted hotfix top-level directory and run the script to
start the hotfix installer:
On Windows:
service_pack.bat
On Unix*:
./service_pack.sh
After you run the script, the
Sentinel 6.1 SP1 is the prerequisite for this hotfix
installation
message appears.
8
Perform the following:
On Windows: Press Enter if Sentinel 6.1 SP1 is already installed and continue with the
installation or Ctrl+C to terminate the installation and install Sentinel 6.1 SP1.
On Unix: Press y if Sentinel 6.1 SP1 is already installed and continue with the installation
or n to terminate the installation and install Sentinel 6.1 SP1.
9
Press Enter when prompted to start the hotfix installation procedure.
10
After the installation completes, log out and log in to apply the environmental variable changes.
11
Repeat
Step 1
through
Step 10
on every Sentinel server and client machine that has Sentinel
software installed.
12
Restart Sentinel services on all machines:
On Windows: use the Windows Service Manager to start the Sentinel services.
On Unix: run
$ESEC_HOME/bin/sentinel.sh start
