Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX, Руководство пользователя

Страница: 46 / 254

46 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
6 Continue through the installation process until you reach the Novell Open Enterprise Server
Configuration page.
7
On the Novell Open Enterprise Server Configuration page, do one of the following:
Š
Configure Novell Cluster Services now: If eDirectory is already installed and running in
your environment and you want to configure clustering for the server now, continue with
Section 3.6.3, “Enabling the Novell Cluster Services Configuration Page in YaST,” on
page 48
.
Š
Configure Novell Cluster Services later: Continue with the rest of the Novell Cluster
Services installation, but do not configure clustering. You can configure clustering later by
using
YaST > Open Enterprise Server > OES Install and Configuration to access the
Novell Open Enterprise Server Configuration page. For information, see Section 3.6,
“Configuring Novell Cluster Services,” on page 46 .
3.6 Configuring Novell Cluster Services
You can create a new cluster or add a server to an existing cluster during the OES 2 Linux
installation, or afterwards by using the
Open Enterprise Server > OES Install and Configuration
tool in YaST.
IMPORTANT: If Novell Cluster Services is already configured on the server, see Section 8.13,
“Moving a Cluster, or Changing IP Addresses, LDAP Server, or Administrator Credentials for a
Cluster,” on page 105
for information about modifying an existing cluster configuration.
If you are creating a new cluster, the Novell Cluster Services configuration does the following:
Š
Creates a new Cluster object and a Cluster Node object in eDirectory.
Š Creates a special cluster partition for the Split Brain Detector (SBD) if you have a shared disk
system.
If you are adding a server to an existing cluster, the Novell Cluster Services configuration does the
following:
Š
Creates a new Cluster Node object in eDirectory.
Š Section 3.6.1, “Opening the Novell Open Enterprise Server Configuration Page,” on page 46
Š
Section 3.6.2, “Using Different LDAP Credentials for the Cluster Configuration,” on page 47
Š Section 3.6.3, “Enabling the Novell Cluster Services Configuration Page in YaST,” on page 48
Š
Section 3.6.4, “Configuring a New Cluster,” on page 48
Š Section 3.6.5, “Adding a Node to an Existing Cluster,” on page 50
3.6.1 Opening the Novell Open Enterprise Server Configuration
Page
1 Log in to the server as the
root
user.