Novell LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION, Руководство пользователя

Страница: 100 / 132

8.3.3 Upgrading the RHEL 4 Drivers
1
Open a terminal.
2
Locate the RPM package you want to install (
opt/novell/
vm-driver-pack
).
If you are installing from the binary RPM included with the driver pack, the RPM
is located on the driver pack ISO. Refer to
Section 6.2, “Virtual CD Readers”
(page 49). for instructions on using the ISO image.
(Optional) If you are installing from an RPM that you built, the RPM is located
in
/usr/src/redhat/RPMS/ xxx
, where
xxx
is the architecture of the vir-
tual machine. See Section 8.3.5, “Building Your Own RPMs” (page 91) for more
information.
3
Enter
rpm -U xxx .rpm
, where
xxx
is the filename of the new RPM.
8.3.4 Using the Drivers with an Upgraded
Kernel
1 Install the new kernel packages.
2
Edit the
/boot/grub/menu.lst
file and remove all
hdx=noprobe
entries
from the kernel line.
3 Restart the virtual machine.
4 Upgrade the driver pack (see Section 8.3.3, “Upgrading the RHEL 4 Drivers”
(page 90)).
5
Edit the
/boot/grub/menu.lst
file and make the following change:
For each drive specified in the virtual machine configuration file (for example,
hda and hdb), append
hdx =noprobe
to the kernel line for the updated kernel,
where
hdx
is the drive specification found in the virtual machine configuration
file.
90 Virtualization with Xen