Novell IMANAGER - INSTALLATION V2.7, Руководство по установке

Страница: 19 / 32

Installing iManager 19
n
ov
do
cx (e
n)
16
Ap
ril 20
10
1.5.2 iManager Server on Windows
If the iManager 2.7 installation routine detects a previously installed version of iManager 2.5 or 2.6,
it prompts you that it will remove the existing iManager and Tomcat. If you do not want this to
happen, stop the installation.
However, when removing the previously installed version of iManager, its directory structure is
backed up to the old
TOMCAT_HOME
directory to preserve any previously created custom content.
To prepare for the installation, review the following checklist of prerequisites.
Prerequisites
In addition to the general prerequisites listed in Section 1.2, “Prerequisites,” on page 12 , the
following prerequisites also apply to iManager on Windows:
‰
Previous versions of iManager: If you have installed iManager 2.5 or 2.6, you do not need to
uninstall it. See Chapter 2, “Upgrading iManager,” on page 27 for more information.
‰
Web Services: iManager uses Tomcat on Windows servers. It does not provide any integration
with IIS or Apache environments. However, following the iManager 2.7 installation, you can
manually integrate iManager with your existing Web server infrastructure, if desired.
‰
Processor: Pentium III 600 MHz or higher processor
‰
Disk Space: 500 MB minimum for a local installation
‰
Memory: 512 MB of RAM (1024 MB recommended)
iManager can install the following products during installation:
Š
Tomcat 5.5.29
Š
Sun JRE 1.6.0_20
Š
Novell International Cryptographic Infrastructure (NICI) 2.7.3
Procedure
For information about running iManager Server on the same machine as Novell eDirectory, see
“
Running eDirectory and iManager on the Same Machine (Windows only) ” in the iManager 2.7.4
Administration Guide .
1 Log in as a user with administrator privileges to install iManager.
2 At the Novell download site (http://download.novell.com) , search for iManager products,
select iManager 2.7, then download it to a directory on your server.
3 Extract the file into the iManager folder.
4
Find and run
iManagerInstall.exe
(
extracted_directory \iManager\installs\win
.)
You can view the debug output of the installation program by holding down the Ctrl key
immediately after launching the installer. Continue to hold down the key until a console
window appears. For more information on debugging, see “
Troubleshooting ” in the iManager
2.74 Administration Guide .
5 On the opening iManager splash screen, select a language and click OK .
6 On the introduction page, click Next .
7 Accept the license agreement, then click Next .