Novell IDENTITY MANAGER 3.6.1, Руководство по отчетности

Страница: 32 / 54

32 Identity Manager 3.6.1 Reporting Guide for Novell Sentinel
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
7.2 User-Defined Events
Identity Manager enables you to configure your own events to log to Novell Sentinel. Events can be
logged by using an action in the Policy Builder, or within a style sheet. Any information you have
access to when defining policies can be logged.
User-defined events are logged any time logging is enabled and are never filtered by the
Metadirectory engine. There are two different ways to generate user-defined events:
Š Section 7.2.1, “Using Policy Builder to Generate Events,” on page 32
Š
Section 7.2.2, “Using Status Documents to Generate Events,” on page 35
7.2.1 Using Policy Builder to Generate Events
1 In the Policy Builder, define the condition that must be met to generate the event, then select
the
Generate Event action.
2 Specify an event ID.
Event IDs between 1000 and 1999 are allotted for user-defined events. You must specify a
value within this range for the event ID when defining your own events. This ID is combined
with the Identity Manager application ID of 0003.
3 Select a log level.
Log levels enable you to group events based on the type of event being logged. The following
predefined log levels are available:
Log specific events This option allows you to select the Identity Manager events you want to
log.
Click to select the specific events you want to log. After you select
the events you want to log, click OK .
NOTE: User-defined events are always logged.
For a list of all available events, see Appendix A, “Identity Manager
Events,” on page 43 .
Only update the last
log time The Identity Manager Instrumentation logs only user-defined events.
When an event occurs, the last log time is updated so you can view the
time and date of the last error in the status log.
Logging off The Identity Manager Instrumentation logs only user-defined events.
Turn off logging to
DriverSet, Subscriber
and Publisher logs Turns off logging to the Driver Set object, Subscriber, and Publisher logs.
Maximum Number of
Entries in the Log This setting allows you to specify the maximum number of entries to log
in the status logs.
Option Description