Novell Enhanced Smart Card Method 3.0.1, Руководство по установке

Страница: 18 / 46

18 Novell Enhanced Smart Card Method Installation Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
Use an ampersand (&) in the description to enable Windows’ Alt+letter functionality. In the
example below, Alt+P would place focus on the field labeled with the “PIN:” description.
Figure 2-11
Customized Password Field Description
9
Select the communication interface the method will use to connect to the smart card, then click
Next .
PC/SC functionality is the preferred interface. Select PKCS#11 if you know the smart card
middleware does not integrate with the Windows PC/SC functionality. If you select PKCS#11,
you must also specify a name of the module that is to be used.
Figure 2-12
Smart Card Interfaces Page
10 Click Install .
You can distribute the method to each workstation automatically using tools such as Zenworks
®
.
See Appendix A, “Silent Method Installation on Workstations,” on page 45 for detailed information
about scripting the method install.