Novell DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2, Руководство по установке

Страница: 8 / 11

8 Novell Data Synchronizer Mobility Pack Update 2
6.5 Connector Configuration Settings
On the Connector Configuration Settings pages for the GroupWise Connector and the Mobility
Connector, if you set and save general connector settings, then set and save connector-specific
settings, the general connector settings are not actually saved. However, if you set and save
connector-specific settings, then set and save general connector settings, all changed settings are
saved as expected.
6.6 Internet Explorer 8 Compatibility
If you use Synchronizer Web Admin on Internet Explorer 8, you must enable Compatibility View in
order to display the Sync Engine Advanced options on the Engine Settings page.
1 In Internet Explorer 8, click Tools , then select Compatibility View .
Even with Compatibility View enabled, the Maintenance section on the Engine Settings page
sometimes disappears when you mouse over it. However, with persistent mousing, it is still possible
to click
Clear Cache .
6.7 GroupWise Mobile Server Compatibility
Novell Data Synchronizer is the replacement for GroupWise Mobile Server (GMS). These two
synchronization solutions can coexist successfully, as long as users are transitioned from GMS to
Synchronizer in a timely manner. An issue with GMS can cause a user whose mobile device is
configured to use both synchronization solutions to occasionally receive a large quantity of
extraneous items. As you add users to Synchronizer, you should delete them from GMS. You can
continue to run GMS indefinitely to support users with older mobile devices that are not supported
by Synchronizer.
7 Connector Issues
Š
Section 7.1, “General Connector Issues,” on page 14
Š
Section 7.2, “Connector-Specific Issues,” on page 15
7.1 General Connector Issues
Š
“User Deletion” on page 14
Š
“Connector Does Not Stop” on page 14
Š
“Multiple Instances of the Same Connector” on page 15
7.1.1 User Deletion
In order to delete users from a connector, the connector must be running. If the connector is not
running, some user event data is not properly deleted.