14
Operation of buttons
Power
button:
Press "
", the screen lights up and shows the third level of fog humidity. At same time,
the humidifier starts to operate. Pressing this button again will stop the work. If there is
water shortage, the machine will automatically turn off after 10 seconds.
Ionization:
Press " ", the anion function is working. At the same time, the anion function
symbol will appear on the screen. Press this button again to turn it off.
Humidification power:
Press "
", to adjust the humidification volume. Each time you press the button, the
amount of fog changes from low to medium and high with displaying 1, 2, and 3 on the
indicator.
Constant humidity:
Press "
", to start the auto-humidity function. You can set 45, 50, 55, 60, 65, 70, 75, 80,
85, 90% RH. If you do not switch on this button, the LCD screen displays the current
humidity of the room. When you set the constant humidity, the LCD screen humidity
display will flash setting level. After 5 seconds, the LCD panel will show the current
humidity. At the same time, the light ("%RH") will flash all the time. If you want to check the
level of humidity, you can press the button again.
Eg. If you set the constant humidity to 65%, the product will stop its humidification
when the natural humidity has reached 65%, and start to humidify automatically when the
humidity is lower than 60%RH.
Timer:
Press "
", to start the timer function. You can set 1 hour, 2 hours, 4 hours, and 8
hours. The screen shows the time you set.
Screen Light:
Press
, to turn off the LCD screen light. Press the button again to turn on the light of
the screen.
