N'oveen UH101, Руководство пользователя

Страница: 16 / 27

Filling the tank with water
Remove the water tank from the main body, unscrew the tank cap located
in the tank base (zdj.1) and fill the tank with tap water (at a temperature no higher than 40°
C) and securely screw the cap (zdj. 2)
Dispensing oils
To use the aromatic oils you must do the following.
The dispenser is located on the back of the device (zdj. 3), pull it out (zdj. 4), then on the
sponge in the middle (zdj. 5), put the right amount of oil (as desired). Then, close the
dispenser to the position as in a photo (zdj.6). The device is ready for use.
CLEANING AND CARE
WARNING! Before carrying out any maintenance work on the unit, make sure the
humidifier is turned off, unplugged and wait till all parts cool down.
● To clean the humidifi er do not use abrasive powders or strong solvents.
● To avoid electric shock or unit breakdown do not immerse the humidifier in water.
● It is recommended to remove and clean calcium build up regularly from the humidifier.
● In order to maintain the appearance of a humidifier, clean it with a soft cloth soaked in
warm water.
● Before starting, make sure that the humidifier and all parts are dry.
Water Tank: Before cleaning, ensure that the unit is switched off. Clean after every use
and do not keep water in the tank for longer than 2 days.
Transducer: To clean the (main body) transducer, add some de-scaling cleanser (about
0.5 g powder) onto the transducer and then add a small amount of water and wait for 2-5
16