N'oveen IWH360, Руководство пользователя, Страница: 12 / 26

3. Installation of the bath tap with the shower set is shown in picture 3:
Step-by-step installation:
1. Check if you have a safety valve in the water system, which should be in front of the
battery, if you are unsure, contact the service or a person with appropriate permissions.
2. If the battery needs fixing (Figures 2 and 3), mount it as shown in the picture. Make sure
it is fixed still.
3. Check that all connections are tight.
4. Turn the adjustment handle and let the water out, check the components for leaks. If
there are no leaks, go to the next step - circuit installation.
5. Connect the heater to the power supply, fix the cable to the wall with a cable clamp (do
not damage the power line).
6. Turn the adjustment handle to the hot water area, the digital display will show the
temperature - the water heating will start. Turn the adjustment handle to the cold water
area, the display will go out - the water is not heated.
7. If you have any doubts, contact the service.
12